站内搜索
Haulotte配件中心
HA12IP|HA15IP升降机故障码及报警代码
| F01004 | BDI Cutout | 电量保护被激活 |
| F01005 | Thermal Cutback | 控制器温度超过75度 |
| F02000 | Accel. Fault | 加速器线缆断开，重启FS1和方向开关 |
| F02001 | Accel. Fault | 在开启时，加速器已经被按下或断线，重启FS1和方向开关 |
| F02002 | Overload cage | 工作篮过载 |
| F04000 | Contactor o/c | 接触器闭合故障 |
| F04001 | Contactor s/c | 接触器触点无法分离 |
| F04003 | Fault sequence | 手柄操作顺序错误 |
| F04005 | SRO fault | 方向开关选择在FS1闭合两秒后. 重启FS1和方向开关 |
| F04009 | BatteryLow | 电池电压过低 |
| F04010 | BatteryHigh | 电池电压过高 |
| F04012 | Pers Error | 参数设置错误 |
| F04013 | CRC Error | 参数控制错误 |
| F05000 | Coil s/c | KM1接触器电流过载错误 |
| F05001 | EEPROM Fault | 电擦写内存错误 |
| F05003 | Internal Fault | 变速器内部错误 |
| F05004 | 12V Supply Low | 逻辑电路电压错误 |
| F05005 | System Fault | CAN总线通信错误 |
| F05006 | Mosfet s/c | 变速器MOSFET回路闭合错误 |
| F05008 | P.Up Trac. Weld | KM1接触器启动时已闭合错误 |
| F05009 | P.Up Trac. Mos | 启动时MOSFET错误 |
| F05011 | Drive 0 one | 0号接触器输出激活错误 |
| F05012 | Drive 1 one | 1号接触器输出激活错误 |
| F05013 | Drive 0 off | 0号接触器输出释放错误 |
| F05014 | Drive 1 off | 1号接触器输出释放错误 |
| F05019 | Stack Corrupted | 变速器内部错误 |
| F05020 | Line Cont o/c | KM1闭合错误 |
| F05021 | Coil s/c (standard) | 输入/输出模块逻辑输出错误 |
| F05022 | Coil s/c (ext.) | 上控输入/输出模块逻辑输出错误 |